GB 8965-1998 阻燃防護服- ISO 15025:2000防護服-防火防熱-限制火焰蔓延的測試方法

  ISO 15025:2000 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread

  - EN ISO 11611:2007在焊接及相關工藝中使用的防護服EN ISO 11611:2007 Protective clothing for use in welding and allied processes (only for clause 6.7 flame spread (code letter A1 or A2)) (Supersede EN 470-1)

  GB 8965-1998 阻燃防護服（只做防火性能）Jsgfjc8788192

  - NFPA 2112-2007保護工業(yè)人員防火的耐燃性服裝標準

  NFPA 2112-2007 Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire (Only for clause 8.3 Flame Resistance Test)

  - EN ISO 11611:2007在焊接及相關工藝中使用的防護服

  EN ISO 11611:2007 Protective clothing for use in welding and allied processes (only for clause 6.7 flame spread (code letter A1 or A2)) (Supersede EN 470-1)ISO 15025: 防護服-防火防熱-限制火焰蔓延測試-相關標準:

  - GB 8965-1998 阻燃防護服（只做防火性能）

  - NFPA 2112-2007保護工業(yè)人員防火的耐燃性服裝標準 NFPA 2112-2007 Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire (Only for clause 8.3 Flame Resistance Test) - EN ISO 11611:2007在焊接及相關工藝中使用的防護服 EN ISO 11611:2007 Protective clothing for use in welding and allied processes (only for clause 6.7 flame spread (code letter A1 or A2)) (Supersede EN 470-1)GB/T 9978-1 耐火構件對于耐火性能通用要求（中國標準）– 判定依據(jù)失去完整性：當棉墊被點燃或者背火面燃燒達10秒鐘以上時，被認為試件失去完整性；失去隔熱性： 試件背火面的平均溫升超過試件表面初始平均溫度140℃或者背火面在任何一點的溫升超過該點初始溫度180℃時，則被認為試件失去隔